My watch list from premkt Island(based on vol/pts up/dn): ffiv ppdi ntap fcx frx bidu ice aapl cnc ent nbix. Gap ups reversed, most downs continued or filled gap/reversed. Used parabolic sar and 10/20 slope and crossover on 1 min charts for gap ups for signals and worked well: ffiv ppdi frx bidu aapl. Quick reversals on gap ups in down markets seem to be the key. 3 bar b/d work well on 5 min gap downs(this may be esp true of down mkt...and probably true with up market and gap ups=they b/o and continue up): tgt cnc I don't rely on my candle stick charts from Scottrade so I use different time frames, ema. X, hope you had good holiday in England, saw the Queen and all.
DISCLAIMER - I DO NOT MAKE RECOMMENDATIONS TO BUY OR SELL SECURITIES; I JUST POST MY THOUGHTS, TRADES, AND OPINIONS. DO YOUR OWN DUE DILIGENCE - YOU ARE RESPONSIBLE FOR YOUR TRADES, INVESTMENTS, AND DECISIONS. ALL CHARTS ARE COURTESY OF REALTICK. ALL TIMES INDICATED ARE NY (EST).
> around 2,200 subscribers by feedburner
> over 200 via email by feedblitz
> 67 by carrier-pigeon
> and 2.4 million people visited the site yesterday alone (give or take 2.397 million)
contact me if you are interested in detailed stats.
7 comments:
Traded VLO on break of 3rd 15 min bar, wary of the top from previous day..
Shorted CNC on break of 4th 15min bar, although not so sure about entry signal
Looks like CNC took the dive...however, since the gap is so large, should I just going for about halfway to the Fibonacci extension?
I would close at least 1/2 the position at the 1/2-way point.
TJ
My watch list from premkt Island(based on vol/pts up/dn): ffiv ppdi ntap fcx frx bidu ice aapl cnc ent nbix. Gap ups reversed, most downs continued or filled gap/reversed. Used parabolic sar and 10/20 slope and crossover on 1 min charts for gap ups for signals and worked well: ffiv ppdi frx bidu aapl. Quick reversals on gap ups in down markets seem to be the key. 3 bar b/d work well on 5 min gap downs(this may be esp true of down mkt...and probably true with up market and gap ups=they b/o and continue up): tgt cnc
I don't rely on my candle stick charts from Scottrade so I use different time frames, ema.
X, hope you had good holiday in England, saw the Queen and all.
Did any one trade IVAC or DGII on the 15-minute charts?
WCG
big move
Post a Comment